IFM-2系列

非接触式磨粒传感器

IFM-2 油液金属磨粒传感器是一款特别为在线检测设备磨损的智能化传感器,其特有的微磁感应 测量技术对油品铁磁性磨损颗粒的变化极其敏感,能够实时连续准确的在线监测油品中的磨粒的 含量和温度情况,产品采用最新科研技术,运用全新电路设计和模型算法,充分考虑在线监测过 程中油液粘滞性、流量对磨粒吸附的阻力等对监测的影响,采用非接触式检测方式,无需磁力吸 附只要油液中有磨损颗粒通过,传感器就可运用敏感的感测机构检测到颗粒的含量,经过后端的 数字电路经过转化后及时输出,最大可能的及时对设备故障进行预警,保障我们设备安全稳定的 运行。

应用领域:钢铁、石化、盾构、电力、风电、大型设备、OEM集成

适用油品:齿轮油、柴机油、绝缘油等

Ifm-2 oil metal abrasive sensor is an intelligent sensor specially designed for wear detection of online equipment, with its unique mi- cro magnetic induction The measurement technology is very sensitive to the change of ferromagnetic wear particles in oil produ- cts and can continuously and accurately monitor the wear particles in oil products onlineContent and temperature conditions, p- roducts using the latest scientific research technology, the use of new circuit design and model algorithm, fully consider online mo- nitoring In the process of oil viscosity, flow resistance to abrasive particle adsorption on the impact of monitoring non-contact det- ection method, no magnetic suction As long as there are wear particles in the oil, the sensor can use a sensitive sensing mechanis- m to detect the content of particles, after the back end Digital circuit after conversion, timely output, the maximum possible timel- y warning of equipment failure, to ensure the safety and stability of our equipmentRun.

尺寸及安装/Dimensions and installation

数据传输方式/Data transmission mode

适用条件/Working Condition

最高油温 油路压力 油路流速 工作环境温度 最高海拔 最大振动 最高湿度
+85℃ 0-3Mpa ≤1m/s -20℃-85℃ 5000m 2G 95%

规格参数/Specificationr

型号选择 磨损颗粒 磨损指数 温度 监测指标
IFM-2 0-100% 0-10000ppm -40~+120℃ 大小颗粒、磨损指数、温度
分辨率 0.1% 1ppm ±0.1℃ 或 ±3%

上述选配指标和适用于其中任何一款型号的传感器,可根据实际需求进行配置选择

上述性能参数对应的精度为25℃典型值,遇到超出系统工况要求的情况下,数据可能会发生偏差,精度会根据压力、流量、振动等数据发生变化。

电气性能/Electrical properties

通讯接口 数据传输 功率 电压 重量 外壳材质 电缆长度 防护等级
6芯航插 RS485/232 ≤2W DC 9V~36V 300G 316L 1.5m IP65

上述性能指标适合常规工业现场安装使用,遇到复杂恶劣的户外环境及流体性质的变化,根据现场需求进行定制化设计,也可联系我们的销售工程师进行推荐